Measure from camera images — and judge tolerance in the same step.
Place a part and press Measure. PixMetro matches the image to a model, finds lines, circles, arcs and points, computes distances, angles and diameters, and shows pass/fail.
Trial: every Solo feature with no hardware key, 3 hours of total use.
Illustration (example)
Try it first, buy it when you are convinced.
Every demo runs without a hardware key. Download it and measure for yourself. Ask us for a quote when you are ready for the full version.
PixMetro Solo Demo
Image measurement software that finds lines, circles, arcs and points, measures dimensions and judges tolerance. Try every Solo feature without a hardware key.
- Line, circle, arc, point, screw, gear and lead tools
- Design value and tolerance judgement (green/red)
- Excel reports, statistics by period, DXF
Version 2.9.12.0 · 173.3 MB
XTMeasure-HT 27 Demo
Vickers, Knoop and Brinell hardness measurement software. It measures the indent diagonals (or diameter) on an image, computes hardness and judges pass/fail. Try it without a camera or hardness tester, on the sample pictures or on your own image files.
- Try auto detect on the sample pictures
- Open and measure your own picture files (PNG, JPG, BMP, TIF)
- Result tables, statistics, histogram, conversion charts, annotations, Excel/PDF reports
Version 27.0.11.6 · 144.5 MB
XTMeasure-HB 27 Demo
Brinell hardness (HB) measurement software. It measures the indentation diameter on an image, computes hardness and judges pass/fail. Try it without a camera, on the sample pictures or on your own image files.
- Try auto detect and manual (D1/D2) measurement on the sample pictures
- Open and measure your own picture files (PNG, JPG, BMP, TIF)
- Result tables, statistics, histogram, conversion charts, annotations, Excel and PDF reports
Version 27.0.11.2 · 132.9 MB
ImagePartner 27 Demo
Microscope image-analysis software. It measures lengths, angles and areas on a picture, counts and sizes particles, and offers materials analyses such as grain size. Try it without a camera, on the sample pictures or on your own image files.
- Try Auto Count, Grain Size and length, angle and arc measurement on the three sample pictures (particles, grains, a plate with a notch)
- Open and measure or analyse your own picture files (PNG, JPG, BMP, TIF)
- After you draw and close, the original is kept as it is and a copy is saved
Version 27.0.11.3 · 121.8 MB
XTTile 27 Demo
Image tiling software. It joins several pictures of a subject wider than the field of the microscope into one large image by finding the overlapping edges. Try it without a camera or stage, on the sample pictures or on your own picture files.
- Join the two sample sets (a circuit board 3x3, a ruler 1x4) at once
- Join your own picture files by their overlap, automatically, or move the tiles yourself in By hand
- Export the joined picture as PNG, JPG, TIF or BMP (it carries a DEMO mark)
Version 27.0.11.17 · 124.5 MB
XTFocus 27 Demo
Multi focus software. From several pictures of the same place taken at different heights (Z) it collects the sharp parts into one picture that is sharp everywhere, and a height map. Try it without a camera or stage, on the sample stacks or on your own pictures.
- Compose the two sample stacks (made pictures with known heights) into an all-in-focus picture
- Load and compose your own stack (same place, different heights); a Z in the file name is read
- View the height map and each source picture, export the composed picture and height map (they carry a DEMO mark)
Version 27.0.11.9 · 121.2 MB
From image to report, on one screen.
Capture
Standard USB (UVC/WDM) cameras by default. Other image sources can be connected on request.
Recognize
The part is found by matching the image to a saved model — even several parts in one view.
Measure & judge
Distances, angles and diameters are computed: green inside tolerance, red outside.
Record & report
Excel reports, statistics by period and DXF export follow directly.
Two configurations for your floor.
Both use the same measurement engine, so models and methods carry over.
PixMetro Solo
A stand-alone measuring station. Models, calibrations and history are stored as files — no database server.
- Starts with an ordinary USB camera
- Try it first with the free trial
PixMetro Inline
For production lines. Keeps measurement history in MySQL and links with Mitsubishi PLCs.
- Measurement history in MySQL
- Mitsubishi PLC integration
Everything measurement needs, built in.
Seven measuring tools
Line, circle, arc and point — plus screw, gear and lead (IC pin). Distances and angles between tools come directly.
Tolerance judgement
Set design values and tolerances (absolute or percent, separate upper/lower) and results are judged by color.
Careful calibration
Calibrate on a reference gauge, verify with an on-screen ruler, and fine-tune scale per model.
Partial models & axes
Parts that do not fit the view, partial measurements, or thickness against an XY reference axis — all supported.
Reports & statistics
Excel reports for the current result and statistics reports by period.
CAD (DXF)
Export measured contours to DXF, or overlay a drawing DXF on the image and see differences in color.
PixMetro is not the whole story.
Long-accumulated vision-measurement know-how stands behind it. Capabilities you need are brought into PixMetro.
Many image sources
WDM cameras by default. We have connected vendor-SDK cameras, frame grabbers and more, and can support yours on request.
Analysis on demand
Spheroidization, grain size and particle analysis from our other products can be ported into PixMetro when needed.
Custom development
For demanding tasks we design from camera, lens and lighting through to software.
See the XTMeasure, XTMeasure-HT/HB and ImagePartner family →
Measure your own parts.
The trial gives you every Solo feature, with no hardware key, for 3 hours of total use. Line deployment starts with a conversation.